Other types

Select a Figure 607 Guiberson style replacement ring using the equipment identification and mating groove drawing. State the nominal connection size explicitly and provide actual ring dimensions. Nominal pipe size, ring diameter and groove dimensions are separate order details.

Confirm the Figure 607 lip profile and installation orientation from the equipment drawing. Other union figures require separate seal geometry and must not be assumed interchangeable by nominal size.
Specify the exact NBR, FKM or HNBR compound, hardness tolerance and service conditions. Brass or stainless steel backup constructions need dimensional confirmation. Sour-gas service requires compound-specific qualification; PTFE and PU alternatives require separate grade and geometry review.

Size and fit information for purchasing:

Nominal connection size: State the required equipment connection size and union identification for each line item.
Actual seal dimensions: Provide inner diameter, outer diameter, profile height and groove drawing revision for fit review.
Operating requirements: Include fluid composition, temperature and pressure cycles; confirm the complete union rating and qualified seal compound.
Replacement inspection: Inspect the removed ring and mating groove for damage and confirm the approved replacement profile before installation.
Send the equipment drawing and nominal-size designation to review the replacement configuration.

What we Shanghai Qinuo Industry Provide:

Rubber O rings

• Rubber O rings -As568 series rubber o rings/JB standard rubber o rings.
• Encapsulated rubber o rings- silicone/ FKM rubber o rings
• PTFE coating rubber o rings-kinds of color rubber o rings

Hammer Union seals- 1" 1.5" 2" 3" 4" 6" 7"

• Rubber hammer union seals-Buna/FKM/HNBR rubber type
• Rubber w/brass or stainless steel back up types

Swab cups

• V types 4" 5.5" ect.
• TA type
• MV type
• NUF type
• TUF type

Rubber seal kits- custom packing or lable is available

• #10 setting tool - With burst disk
• #20 setting tool - With burst disk
• AP Compact Setting Tool Kit
• Grease Tubes Seal Kit
• 3 1/2” Shorty Kits
• 3 - 1/8" Weight Bar Kit
• #10 Baker Firing Head Kit
• #20 Firing Head Kit
• #20 BP3.SEC kits
• #10 BP3.SEC kits
• T-BRT redress kit
• T-1 Set
• GC Stripper Head Redress Kits

Wireline Component Parts:

1) Pressure Relief Disc, ZD Plated (application:rupture(bleeder) Disc)

2) Rubber Push Pin -black

3) Nylon Push Pin -natural

4) Retainer Nut, Steel, ZD Plated (Flat, beveled also available) (application: retainer nut)

5) Threaded Steel Plug, w/ Lathe Cut (application:5" port plug)

6) Threaded Brass Plug (application: setting tool plug )

Rubber Packer Elements:

Rubber Oil Savers:

FAQ: