Custom Coloured Rubber O-Rings for Heat-Exposed Oilfield Sealing Enquiries
Heat-Exposed Coloured O-Rings: Define Temperature Duration and Fluid Together
| Selection condition |
Specification to provide |
| Temperature duty |
Normal and peak temperature, peak duration, heating and cooling frequency, and storage conditions. |
| Process exposure |
Fluid composition, additives, gas content and cleaning agents. |
| Dimensions and gland |
ID and cross-section, tolerance, gland geometry and static or moving contact. |
| Compound and colour |
Selected grade, target Shore A hardness and approved colour reference for that compound. |
| Order acceptance |
Sample approval and agreed dimensional, surface and material-document requirements. |
A broad polymer list is not a single product temperature range. Confirm the limits and required validation for the selected grade under the specified fluid and load. Use colour for agreed identification and keep the compound code on the part specification and packing label. The O-ring has no independent pressure rating.
Custom coloured rubber O-ring enquiries for heat-exposed oilfield equipment require dimensions, compound grade and the actual operating duty. Specify the inside diameter and cross-section or an exact standard size reference. Identify continuous temperature, peak exposure and the process fluid separately; colour and nominal hardness do not establish a temperature rating.
|
Material
|
NBR, HNBR, EPDM, silicone or FKM by agreed grade; other polymers subject to separate specification and availability review.
|
|
Hardness
|
20-90 Shore A enquiry range; target hardness and tolerance depend on compound and duty.
|
|
Feature
|
Performance depends on the specified compound, dimensions and operating duty for each ring.
|
|
Mode of Production
|
Compression, injection, injection transfer, extrusion, molding
|
|
Production Capabilities
|
Tooling and inspection requirements confirmed for each requested size and compound.
|
|
Size/Color
|
The size and color can be custom as customer’s requirements
|
|
Other Service
|
Customized drawing designs are welcome.Customized OEM products
|
Application of the rubber o ring:
For oil and gas equipment joints, provide the sealing position, fluid and additives, normal and peak temperature, pressure cycle and static or moving duty. Review the selected compound against the complete operating conditions. Do not assume EPDM is suitable for petroleum oil. Sour-gas and rapid gas decompression duty require separate compound-specific qualification.
Structure and sizes:
AS568 enquiries by exact dash number and revision; list custom ID and cross-section separately.
Sizes: (ID × C/S) (mm)
Packing and shipping:
Standard export packing, inner plastic bag, outer with carton. Carton in pallets if necessary.
1: Express: DHL,UPS, TNT, FedEx, EMS ect, for urgent and small order.
2: Air shipment: air port to air port or air port to door.
3: Sea shipment: suitable for bulk goods. it will takes more longer time than air shipment.
The steps of the production:
Other relative rubber products for oil drilling use:
Company Profile:
Shanghai Qinuo Industry Co. Ltd supplies rubber, plastic and machined parts to agreed drawings. Our ISO 9001 quality management supports specification review and inspection. For heat-exposed coloured O-rings, agree the compound, dimensions, hardness, colour sample and inspection criteria before production.
FAQ
Q1: Are you manufacture or trading company?
We are manufacture. Our factory located in Haimen District, Nantong City, Jiangsu Province.
Q2: How can we guarantee quality?
Agree O-ring dimensions, tolerances, compound hardness and colour acceptance criteria. Include the specified temperature cycle and fluid exposure with any required material documents or application-test requirements.
Q3: Can I get some samples?
Confirm sample availability, quantity, selected compound, colour and shipping terms for the specified heat-exposure duty with the quotation.
Q4: Can you produce OEM products?
Yes, we can produce by your samples or 3D drawings. We can build the molds and fixtures.
Q5: What's the term of payment ?
Amount < US$5000,100% paid in advance by paypal or T/T;
Amount >= US$5000, 30% paid in advance, 70% balance before shipment by T/T
Q6: Can you manage the shipment?
Sure, we can arrange different ship ways according to the goods final packing: by express, by air or by sea.
Q7: What is the lead time?
Stock goods: generally within 7days according to the quantity.
Produce Goods: 12-25days according to the packing and quantity.
Send us message
Web: https://www.unionseal.com
Your message must be between 20-3,000 characters!
