NBR Industrial Rubber Pipe Wiper for Enhanced Drilling Performance and Safety

9-Inch NBR Flat Pipe Wiper | External Drill String Wiping

Why NBR? The Material of Choice for Oilfield Performance

1. Nitrile (NBR) compound selection for drilling service depends on fluid exposure and mechanical duty:
2. Oil Compatibility: Review the selected NBR compound against the exact oil, mud additives and cleaning chemicals. Do not assume all OBM or synthetic fluids have the same compatibility.
3. Abrasion Duty: Specify pipe speed, solids exposure and surface condition. Review wear and replacement criteria for the installed wiper.
4. Elastic Response: Confirm compound hardness and opening geometry for pipe-body contact and tool-joint passage.

FAQ

Q1: Why should I choose NBR over Natural Rubber for my pipe wipers?
A: NBR is commonly considered for oil-exposed rubber components. Select the exact compound using the actual fluid formulation, additives and temperature, and review relevant immersion data.

Q2: Can these NBR wipers withstand high-temperature drilling?
A: Confirm the selected compound against actual fluid and ambient temperatures, duration and rubbing duty. HNBR alternatives require specific review; the material name alone does not establish high-temperature or H2S suitability.

Hot-Selling Products

Inspection and Reorder Information for a 68 mm Opening Wiper

For this listed configuration, verify the 68 mm center opening against the removed sample or drawing. Check outside diameter, thickness and retaining surfaces separately from pipe-body and largest tool-joint dimensions. Record the drawing revision and selected NBR compound for repeat orders.

Send close views of opening-edge wear, cracking or swelling with the mud formulation and cleaning exposure. These details help review the replacement specification; they do not establish a fixed service life or diagnose every cause of damage.