Product Description:
Round Rubber Packer Elements: Setting Movement and Sealing Interface
A rubber packer element is the elastomer sealing component of a specified downhole packer. Its round geometry must match the mandrel, bore and supporting parts. Review the sealing interface and setting arrangement before selecting a replacement element.
The required deformation is determined by the complete tool geometry and setting movement. Provide inside diameter, outside diameter, axial height and profile tolerances with the part revision. Dimensions from different packer designs are not interchangeable without a fit review.
Specify differential pressure, operating temperature, fluid composition and exposure time for compound selection and assembly qualification. Rubber hardness or a general expansion description alone does not establish a pressure or temperature rating.
Features:
- Product Name: Rubber Packer Elements
- Durability: Define operating cycles and inspection criteria
- Chemical Resistance: Match compound to specified fluid and temperature
- Type: Packer Element
- Shape: Round
- Original: Shanghai China
This round packer rubber seal is selected for the mating downhole assembly. The rubber sealing element must match the approved drawing. This rubber packing seal is supplied to the specified profile, dimensions and compound requirements.
Technical Parameters:
| Expansion |
Defined by setting travel and tool geometry |
| Environment |
Oil and gas field |
| Durability |
Defined by setting travel and tool geometry |
| Application |
Oilfield, Downhole |
| Abrasion Resistance |
Specify compound test and acceptance criteria |
| Logo |
Custom |
| Shape |
Round |
| Color |
Black or custom |
| Original |
Shanghai, China |
| Chemical Resistance |
Review exact fluid composition and temperature |
Applications:
Use the element in the downhole packer assembly identified on the approved drawing. Confirm the actual bore, mandrel, support geometry and required setting movement so that the rubber can contact the intended sealing surface.
A replacement must be reviewed against the original part revision and complete tool geometry. Similar appearance does not establish equivalent fit or service capability.
The Royal WayRubber Oil Packer elements can be supplied in black or a specified custom color. Specify the compound independently of color and agree carton packing for the approved dimensions.
Review the following details for the specified packer assembly:
- Mating mandrel and bore dimensions
- Setting travel and deformation requirements
- Support components and extrusion clearances
- Fluid composition, temperature and exposure time
Inspect the element and mating surfaces before assembly. Define dimensional acceptance, permitted surface defects and required material or assembly tests with the replacement specification.
Packing and Shipping:
FAQ:
Q: What is the brand name of this product?
A: The brand name of this product is Royal Way.
Q: What is the name of this product?
A: The name of this product is Rubber Oil Packer.
Q: Where is this product manufactured?
A: This product is manufactured in Shanghai, China.
Q: What are the dimensions of this product?
A: Provide inside diameter, outside diameter, axial height and profile dimensions with tolerances.
Include the part revision and mating tool geometry so that replacement fit can be reviewed.
Q: Can this packer element be used in pumps or hydraulic cylinders?
A: Suitability must be assessed for the specified equipment drawing and service conditions.
A downhole packer element is not a general replacement for pump, valve or cylinder seals.
Your message must be between 20-3,000 characters!
