GC Stripper Head Redress Kit - Replacement Seal Selection
GC Kit Configuration Support
Send the GC assembly reference, drawing revision and replacement seal list to specify a maintenance kit.
Shanghai Qinuo Offered Kinds of Repair Kits use for Oil & Gas Filed
Redress kits:
• #10 setting tool
• #20 setting tool
• DWS 3 5/8 COMPACT
• Grease Tubes Seal Kit
• 3 1/2” Shorty Kits
• 3 - 1/8" Weight Bar Kit
• #10 Baker Firing Head Kit
• #20 Firing Head Kit
• #20 BP3.SEC kits
• #10 BP3.SEC kits
• T-BRT redress kit
• T-1 Set
• GC Stripper Head Redress Kits
Swivel Joint Repair Kits
• 2" Normal Swivel Kit
• 2" SMI-Oversized Swivel Joint Kit
• 3" SPM Swivel Kit
• 3" Swivel Kit
• 3" Wide Swivel Kit
•4" 10k 1002 FET/Flowvalve
• 4" 15k Kemper Swivel Kit
• 4" 15k Forum Swivel Kit
• 4" 15k FlowValve Swivel Kit
• 4" 15k TSI Swivel Kit
Hammer Union Seals
All Available Hammer Union Repair Kits List :
1" 1502, Buna / FKM/ HSN
1-1/2" 1502, Buna / FKM / HSN
2" 602/1502, Buna / FKM / HSN(Brass/Stainless Anti-Ext)
3" 602/1502, Buna / FKM / HSN(Brass/Stainless Anti-Ext)
4" 602/1002/1502, Buna / FKM/ HSN(Brass/Stainless Anti-Ext)
2" FIG 206, Buna / FKM / HSN(AS568-228)
3" FIG 206, Buna / FKM / HSN(AS568-236)
4" FIG 206, Buna / FKM / HSN(AS568-346)
Plug Valve Seal Kits
1" Low Torque Plug Valve Seal Kit
2" X 1" Low Torque Plug Valve Seal Kit
2" X 2" Low Torque Plug Valve Seal Kit
3" Low Torque Plug Valve Seal Kit
4" Low Torque Plug Valve Seal Kit
Qinuo Equipment list:
| 20 Cavities Rounding Comounding Machines |
Automatic Powder Distribution Machine |
Automatic Oil Distribution Machine |
8 Sets of Open Cell Mixers
( From 6 inches to 16 inches) |
5 Layers of Material Cooling Machine |
3 Sets of 55kq Closed Cell Mixers |
| 2 Sets of Material Preform Machine |
3 Sets of Silicone Vacuum Mixer |
65 mm Diameter Silicone Extrusion Line |
| JG-65mm Diameter Silicone Extrusion Line |
75mm Diameter Silicone Extrusion Line |
90 mm Diameter General Rubber
Extrusion Line |
75mm Diameter General
Rubber Extrusion Line |
Fiber Reinforced Rubber Extrusion Line |
Vulcanizing Tank |
| Adhesive Machin |
28 Sets of Small Vulcanizing Molding Machines(From 50Ton to 100 Tons) |
25 Sets of 200 Ton Vulcanizing
Molding Machine |
4 Sets of 200 Ton Injection
Compression Machine |
2 Sets of 200 Ton Vacumm
Compression Machine |
2 Sets of 250 Ton Vulcanizing
Molding Machine |
2 Sets of Horizontal Molding Machine |
4 Sets of 300 Ton Vulcanizing
Molding Machine |
2 Sets of 300 Ton Injection
Compression Machine |
Punching Machine |
Tensile Strength Tester |
| Brittleness Tester |
Hardness Tester |
Thickness Gauge |
| Mooney viscometer |
Rheometer Tester |
Analytical Balance |
| Electrical Resistance Measurer |
Density Tester |
2 sets Aging Testing Oven |
Qinuo Material processing range:
Silicone
|
SBR |
ACM |
PE |
| EPDM |
NBR |
IIR |
PC |
| Neoprene |
Silicone Sponge |
CSM |
PP |
| Urethane |
Closed Cell Sponge |
ABS |
PA |
| |
HNBR |
Hard PVC |
TPE |
| NR |
ECO |
Soft pvc |
TPV |
| POM |
TPU |
|
|
Qinuo Custom Capabilties:
| Customized services |
Plastic & Rubber bonding |
Mold Design |
| Customized extrusion |
Extrusion and bonded gaskets |
Mold Production |
| Injection Molding |
Self Adhesive rubber profile |
Customized Package |
| Sheet Cutting |
Rubber Complex Intake Hose |
Problem Solving |
| Standard Size extrusion |
Reinforced rubber tubes |
Assembly |
| Special Compound design |
Rubber Solution Suggestion |
Sourcing |
| Rubber& Metal bonding |
Product Description
The GC stripper head redress kit supplies replacement sealing components according to the agreed assembly parts list. Identify each component position, profile and quantity for the specific GC configuration before ordering.
Seal dimensions are defined by the component drawing, including inner diameter, cross-section or other profile dimensions and tolerances. A general size range does not establish fit for a GC assembly.
Specify the approved compound for each seal position together with the operating fluid, temperature and motion requirements.
|
Material:
|
NBR, HNBR, FKM or EPDM options subject to component geometry and service compatibility review.
|
|
Hardness
|
Specify Shore A hardness and tolerance for each rubber component.
|
|
Mode of Production
|
Compression, injection, injection transfer, extrusion, silicone liquid injection
|
|
Production Capabilities
|
Wide ranges of our machines including 150T,200T,250T, 300T and 500T
|
|
Size/Color
|
Dimensions according to the GC component drawing; colors specified separately for identification.
|
Other relative rubber products for oil drilling use:
Moulded Rubber Products
Rubber Bonded with Metal Products
Packing and shipping
1: Express: S.F. , DHL, UPS, TNT, FedEx ect, for urgent and small order.
2: Air shipment: air port to air port , or air port to door.
3: Sea shipment: suitable for bulk goods. it will takes more longer time than air shipment.
Our company
Shanghai Qinuo Industry Co. Ltd
provides rubber product design and production services for specified component drawings and application requirements.
Our company provides professional plastic parts, rubber parts and maching parts design and production services, products mainly used in automobiles, household appliances, machinery equipment and oil industry and other fields. We have a professional production and sales team, "High-Quality, High Professionalism, High Efficiency" are the principles of doing things.
We have two factories, more than 30 injection molding machines, molding machines and CNC lathes. Our company is located in Pudong New Area, Shanghai. Elegant environment, convenient transportation, Only need 30 minutes from our company to Pudong Airport.
Quality management is supported by ISO 9001. Specify any additional material or inspection documentation required for the selected components.
FAQ
1. What identifies the correct GC replacement kit?
Provide the stripper head assembly number, drawing revision and seal-position list. Include the required profiles, dimensions and quantities per kit.
Keep GC components separate from setting tool, adapter and firing-head kit references when preparing a maintenance order.
2. What information is needed for seal material selection?
a. The fluid composition and additives contacting the seals.
b. Normal and peak operating temperatures.
c. Pressure cycles and operating clearance requirements.
d. Movement and lubrication conditions at the seal position.
e. Cleaning fluids and storage conditions.
f. Compound and hardness requirements by component.
g. Required material and inspection documentation.
3. Does a polymer name establish GC kit performance?
1. NBR, HNBR, FKM and EPDM identify material families, not a complete compound specification.
2. Match each compound to the actual fluid and temperature.
3. Review dimensions, profile and hardness with the assembly design.
4. Specify gas exposure or decompression requirements where applicable.
5. Approve alternatives by component position before production.
4. What should be checked during GC maintenance?
1. Compare replacement parts with the agreed assembly list.
2. Inspect sealing surfaces according to the equipment maintenance instructions.
3. Confirm component dimensions and quantities before installation.
4. Follow the equipment procedure for assembly and required checks.
5. Retain the approved kit configuration for repeat orders.
More information about AS568-226 Colored Buna 90 Shore A Rubber O Rings Use for Seal Block Top Kits
Send the GC stripper head drawing, seal list and service requirements for a replacement kit quotation.
Welcome to contact us for more information.
www.unionseal.com
Your message must be between 20-3,000 characters!
