Tool Trap Shaft Redress Kit — Replacement Seals for Assembly Maintenance
Tool Trap Shaft Kit Selection
Provide the tool trap manufacturer, model, shaft assembly revision and replacement part numbers. Match each seal to its installation position, dimensions and compound requirement; this kit is a maintenance component set rather than a complete tool trap.
Shanghai Qinuo Offered Kinds of Repair Kits use for Oil & Gas Filed
Redress kits:
• #10 setting tool
• #20 setting tool
• DWS 3 5/8 COMPACT
• Grease Tubes Seal Kit
• 3 1/2” Shorty Kits
• 3 - 1/8" Weight Bar Kit
• #10 Baker Firing Head Kit
• #20 Firing Head Kit
• #20 BP3.SEC kits
• #10 BP3.SEC kits
• T-BRT redress kit
• T-1 Set
• GC Stripper Head Redress Kits
Swivel Joint Repair Kits
• 2" Normal Swivel Kit
• 2" SMI-Oversized Swivel Joint Kit
• 3" SPM Swivel Kit
• 3" FMC Swivel Kit
• 3" Wide Swivel Kit
•4" 10k 1002 FET/Flowvalve
• 4" 15k Kemper Swivel Kit
• 4" 15k Forum Swivel Kit
• 4" 15k FlowValve Swivel Kit
• 4" 15k TSI Swivel Kit
Hammer Union Seals
All Available Hammer Union Repair Kits List :
1" 1502, Buna / FKM / HSN
1-1/2" 1502, Buna / FKM / HSN
2" 602/1502, Buna / FKM / HSN(Brass/Stainless Anti-Ext)
3" 602/1502, Buna / FKM / HSN(Brass/Stainless Anti-Ext)
4" 602/1002/1502, Buna / FKM / HSN(Brass/Stainless Anti-Ext)
2" FIG 206, Buna / FKM / HSN(AS568-228)
3" FIG 206, Buna / FKM / HSN(AS568-236)
4" FIG 206, Buna / FKM / HSN(AS568-346)
Plug Valve Seal Kits
1" Low Torque Plug Valve Seal Kit
2" X 1" Low Torque Plug Valve Seal Kit
2" X 2" Low Torque Plug Valve Seal Kit
3" Low Torque Plug Valve Seal Kit
4" Low Torque Plug Valve Seal Kit
Qinuo Equipment list:
| 20 Cavities Rounding Comounding Machines |
Automatic Powder Distribution Machine |
Automatic Oil Distribution Machine |
8 Sets of Open Cell Mixers
( From 6 inches to 16 inches) |
5 Layers of Material Cooling Machine |
3 Sets of 55kq Closed Cell Mixers |
| 2 Sets of Material Preform Machine |
3 Sets of Silicone Vacuum Mixer |
65 mm Diameter Silicone Extrusion Line |
| JG-65mm Diameter Silicone Extrusion Line |
75mm Diameter Silicone Extrusion Line |
90 mm Diameter General Rubber
Extrusion Line |
75mm Diameter General
Rubber Extrusion Line |
Fiber Reinforced Rubber Extrusion Line |
Vulcanizing Tank |
| Adhesive Machin |
28 Sets of Small Vulcanizing Molding Machines(From 50Ton to 100 Tons) |
25 Sets of 200 Ton Vulcanizing
Molding Machine |
4 Sets of 200 Ton Injection
Compression Machine |
2 Sets of 200 Ton Vacumm
Compression Machine |
2 Sets of 250 Ton Vulcanizing
Molding Machine |
2 Sets of Horizontal Molding Machine |
4 Sets of 300 Ton Vulcanizing
Molding Machine |
2 Sets of 300 Ton Injection
Compression Machine |
Punching Machine |
Tensile Strength Tester |
| Brittleness Tester |
Hardness Tester |
Thickness Gauge |
| Mooney viscometer |
Rheometer Tester |
Analytical Balance |
| Electrical Resistance Measurer |
Density Tester |
2 sets Aging Testing Oven |
Qinuo Material processing range:
Silicone
|
SBR |
ACM |
PE |
| EPDM |
NBR |
IIR |
PC |
| Neoprene |
Silicone Sponge |
CSM |
PP |
| Urethane |
Closed Cell Sponge |
ABS |
PA |
| |
HNBR |
Hard PVC |
TPE |
| NR |
ECO |
Soft pvc |
TPV |
| POM |
TPU |
|
|
Qinuo Custom Capabilties:
| Customized services |
Plastic & Rubber bonding |
Mold Design |
| Customized extrusion |
Extrusion and bonded gaskets |
Mold Production |
| Injection Molding |
Self Adhesive rubber profile |
Customized Package |
| Sheet Cutting |
Rubber Complex Intake Hose |
Problem Solving |
| Standard Size extrusion |
Reinforced rubber tubes |
Assembly |
| Special Compound design |
Rubber Solution Suggestion |
Sourcing |
| Rubber& Metal bonding |
Product Description
Tool trap shaft replacement seals are specified from the assembly parts list. For each O-ring, provide inner diameter, cross-section and tolerance, or the original part number and drawing. Identify any additional seal profiles or non-rubber parts separately.
Shaft diameter and nominal equipment size do not by themselves define every replacement ring. Include gland dimensions and component quantities per kit where needed for identification.
Select replacement compounds for the contacting fluids, temperature and shaft movement specified by the equipment design.
|
Material:
|
Compound selected per component; provide the original material reference and service conditions
|
|
Hardness
|
Specify Shore A hardness and tolerance for each rubber component
|
|
Mode of Production
|
Compression, injection, injection transfer, extrusion, silicone liquid injection
|
|
Production Capabilities
|
Wide ranges of our machines including 150T,200T,250T, 300T and 500T
|
|
Size/Color
|
Dimensions and identification colors to the approved component specification
|
Other relative rubber products for oil drilling use:
Moulded Rubber Products
Rubber Bonded with Metal Products
Packing and shipping
1: Express: S.F. , DHL, UPS, TNT, FedEx ect, for urgent and small order.
2: Air shipment: air port to air port , or air port to door.
3: Sea shipment: suitable for bulk goods. it will takes more longer time than air shipment.
Our company
Shanghai Qinuo Industry Co. Ltd
provides rubber product design and production services for industrial applications.
Our company provides professional plastic parts, rubber parts and maching parts design and production services, products mainly used in automobiles, household appliances, machinery equipment and oil industry and other fields. We have a professional production and sales team, "High-Quality, High Professionalism, High Efficiency" are the principles of doing things.
We have two factories, more than 30 injection molding machines, molding machines and CNC lathes. Our company is located in Pudong New Area, Shanghai. Elegant environment, convenient transportation, Only need 30 minutes from our company to Pudong Airport.
Our quality management system is certified to ISO 9001. Include any product-specific material or inspection documentation requirements with the enquiry.
FAQ
1. How do I identify a tool trap shaft kit?
Send the complete equipment model, shaft assembly drawing and revision. Include the component part numbers and quantities per maintenance set.
A photograph can assist identification but should be paired with dimensions and original component references.
2. What shaft details matter for replacement seals?
a. Shaft and gland dimensions, including applicable tolerances.
b. Seal profile and installation position.
c. Whether the shaft rotates, reciprocates or remains stationary at the seal position.
d. Operating fluids, pressure and temperature.
e. Lubricant and cleaning-agent compatibility.
f. Mating surface condition and finish requirements.
g. Original compound and hardness specification.
3. Does an O-ring kit restore the tool trap mechanism?
1. Seal replacement addresses the specified sealing components.
2. Inspect mechanical parts separately under the equipment maintenance procedure.
3. Confirm the required springs, bearings or other parts if they are included in the maintenance scope.
4. Do not infer mechanism function or equipment pressure rating from the seal kit alone.
5. Perform prescribed assembly checks before returning equipment to service.
4. What should the enquiry include?
1. Tool trap model and shaft assembly revision.
2. Replacement component schedule and quantity.
3. Dimensions, material and hardness requirements.
4. Inspection records and kit identification requirements.
5. Packaging and delivery quantity for each maintenance set.
More information about AS568-226 Colored Buna 90 Shore A Rubber O Rings Use for Seal Block Top Kits
Send the tool trap shaft drawing or original component details for a matched replacement kit quotation.
Welcome to contact us for more information.
www.unionseal.com
Your message must be between 20-3,000 characters!
