3-1/2 Inch Shorty Redress Kit — Replacement Seals and Kit Contents
Shorty Seal Kit Matching
Select this 3-1/2 inch Shorty redress kit against the service parts list for the actual Shorty assembly. The nominal equipment size helps identify the tool family; it does not specify every seal diameter. State the manufacturer, model and revision, then confirm which replacement seals and supporting components are required for the planned maintenance.
Shanghai Qinuo Offered Kinds of Repair Kits use for Oil & Gas Filed
Redress kits:
• #10 setting tool
• #20 setting tool
• DWS 3 5/8 COMPACT
• Grease Tubes Seal Kit
• 3 1/2” Shorty Kits
• 3 - 1/8" Weight Bar Kit
• #10 Baker Firing Head Kit
• #20 Firing Head Kit
• #20 BP3.SEC kits
• #10 BP3.SEC kits
• T-BRT redress kit
• T-1 Set
• GC Stripper Head Redress Kits
Swivel Joint Repair Kits
• 2" Normal Swivel Kit
• 2" SMI-Oversized Swivel Joint Kit
• 3" SPM Swivel Kit
• 3" FMC Swivel Kit
• 3" Wide Swivel Kit
•4" 10k 1002 FET/Flowvalve
• 4" 15k Kemper Swivel Kit
• 4" 15k Forum Swivel Kit
• 4" 15k FlowValve Swivel Kit
• 4" 15k TSI Swivel Kit
Hammer Union Seals
All Available Hammer Union Repair Kits List :
1" 1502, Buna / FKM/ HSN
1-1/2" 1502, Buna / FKM/ HSN
2" 602/1502, Buna / FKM/ HSN(Brass/Stainless Anti-Ext)
3" 602/1502, Buna / FKM/ HSN(Brass/Stainless Anti-Ext)
4" 602/1002/1502, Buna / FKM/ HSN(Brass/Stainless Anti-Ext)
2" FIG 206, Buna / FKM/ HSN(AS568-228)
3" FIG 206, Buna / FKM/ HSN(AS568-236)
4" FIG 206, Buna / FKM / HSN(AS568-346)
Plug Valve Seal Kits
1" Low Torque Plug Valve Seal Kit
2" X 1" Low Torque Plug Valve Seal Kit
2" X 2" Low Torque Plug Valve Seal Kit
3" Low Torque Plug Valve Seal Kit
4" Low Torque Plug Valve Seal Kit
Qinuo Equipment list:
| 20 Cavities Rounding Comounding Machines |
Automatic Powder Distribution Machine |
Automatic Oil Distribution Machine |
8 Sets of Open Cell Mixers
( From 6 inches to 16 inches) |
5 Layers of Material Cooling Machine |
3 Sets of 55kq Closed Cell Mixers |
| 2 Sets of Material Preform Machine |
3 Sets of Silicone Vacuum Mixer |
65 mm Diameter Silicone Extrusion Line |
| JG-65mm Diameter Silicone Extrusion Line |
75mm Diameter Silicone Extrusion Line |
90 mm Diameter General Rubber
Extrusion Line |
75mm Diameter General
Rubber Extrusion Line |
Fiber Reinforced Rubber Extrusion Line |
Vulcanizing Tank |
| Adhesive Machin |
28 Sets of Small Vulcanizing Molding Machines(From 50Ton to 100 Tons) |
25 Sets of 200 Ton Vulcanizing
Molding Machine |
4 Sets of 200 Ton Injection
Compression Machine |
2 Sets of 200 Ton Vacumm
Compression Machine |
2 Sets of 250 Ton Vulcanizing
Molding Machine |
2 Sets of Horizontal Molding Machine |
4 Sets of 300 Ton Vulcanizing
Molding Machine |
2 Sets of 300 Ton Injection
Compression Machine |
Punching Machine |
Tensile Strength Tester |
| Brittleness Tester |
Hardness Tester |
Thickness Gauge |
| Mooney viscometer |
Rheometer Tester |
Analytical Balance |
| Electrical Resistance Measurer |
Density Tester |
2 sets Aging Testing Oven |
Qinuo Material processing range:
Silicone
|
SBR |
ACM |
PE |
| EPDM |
NBR |
IIR |
PC |
| Neoprene |
Silicone Sponge |
CSM |
PP |
| Urethane |
Closed Cell Sponge |
ABS |
PA |
| |
HNBR |
Hard PVC |
TPE |
| NR |
ECO |
Soft pvc |
TPV |
| POM |
TPU |
|
|
Qinuo Custom Capabilties:
| Customized services |
Plastic & Rubber bonding |
Mold Design |
| Customized extrusion |
Extrusion and bonded gaskets |
Mold Production |
| Injection Molding |
Self Adhesive rubber profile |
Customized Package |
| Sheet Cutting |
Rubber Complex Intake Hose |
Problem Solving |
| Standard Size extrusion |
Reinforced rubber tubes |
Assembly |
| Special Compound design |
Rubber Solution Suggestion |
Sourcing |
| Rubber& Metal bonding |
Product Description
Build the Shorty replacement schedule from the original component part numbers and installation positions. Where dimensions are supplied instead, include each ring inner diameter, cross-section, tolerance and quantity. Identify non-O-ring profiles and supporting rings separately.
Retain the 3-1/2 inch Shorty designation as an assembly reference. Use component drawings to determine individual seal sizes rather than ordering every ring at the nominal tool size.
Specify compound and hardness for each seal position using the applicable service instructions and operating fluids. Any material substitution requires review against the actual assembly conditions.
|
Material:
|
Compound per Shorty component specification and contacting fluid requirements
|
|
Hardness
|
Shore A hardness and tolerance per seal position
|
|
Mode of Production
|
Compression, injection, injection transfer, extrusion, silicone liquid injection
|
|
Production Capabilities
|
Wide ranges of our machines including 150T,200T,250T, 300T and 500T
|
|
Size/Color
|
Individual dimensions and identification colors per Shorty parts schedule
|
Other relative rubber products for oil drilling use:
Moulded Rubber Products
Rubber Bonded with Metal Products
Packing and shipping
1: Express: S.F. , DHL, UPS, TNT, FedEx ect, for urgent and small order.
2: Air shipment: air port to air port , or air port to door.
3: Sea shipment: suitable for bulk goods. it will takes more longer time than air shipment.
Our company
Shanghai Qinuo Industry Co. Ltd
provides rubber product design and production services for industrial applications.
Our company provides professional plastic parts, rubber parts and maching parts design and production services, products mainly used in automobiles, household appliances, machinery equipment and oil industry and other fields. We have a professional production and sales team, "High-Quality, High Professionalism, High Efficiency" are the principles of doing things.
We have two factories, more than 30 injection molding machines, molding machines and CNC lathes. Our company is located in Pudong New Area, Shanghai. Elegant environment, convenient transportation, Only need 30 minutes from our company to Pudong Airport.
Our quality management system is certified to ISO 9001. Include any product-specific material or inspection documentation requirements with the enquiry.
FAQ
1. Does 3-1/2 inch specify the diameter of every ring?
No. It is the Shorty assembly designation in this listing. Replacement seals require their own part numbers or drawing dimensions, including inner diameter and cross-section where applicable.
Provide the complete assembly reference and revision so seals with similar appearance can be matched to the correct installation positions.
2. Does a redress kit include all parts for a rebuild?
a. Define the intended maintenance scope from the tool instructions.
b. List rubber seals by part number and position.
c. Identify supporting rings or other components separately.
d. Confirm quantities and contents for one complete kit.
e. Check whether mechanical replacement parts are included in the quotation.
f. State any inspection documents required for the supplied components.
g. Follow the applicable assembly procedure and service tests.
3. What material information should accompany the enquiry?
1. Original compound reference for each rubber seal.
2. Required Shore A hardness and tolerance.
3. Contacting fluids, additives and cleaning media.
4. Operating temperature and pressure conditions.
5. Any application-specific acceptance or testing requirements.
4. How should a Shorty kit quotation be requested?
1. Complete 3-1/2 inch Shorty model and manufacturer.
2. Assembly revision and maintenance parts list.
3. Replacement component quantities per kit.
4. Materials, dimensions and inspection requirements.
5. Number of kits and component labeling arrangement.
More information about AS568-226 Colored Buna 90 Shore A Rubber O Rings Use for Seal Block Top Kits
Send the 3-1/2 inch Shorty service parts list or component drawings for a matched replacement seal quotation.
Welcome to contact us for more information.
www.unionseal.com
Your message must be between 20-3,000 characters!
