Oil Saver Rubber 3/8"-5/8" H GA Type Oil Resistance Line Wiper Rubber For Line Wiping Tools

SHQN oil saver rubbers are replacement line-wiping elements for a specified oil saver housing. H and GA elements are selected by housing type and actual line diameter within the 3/8–5/8 inch range. Confirm the actual type, line diameter and element bore before ordering; additional type and size references are separate configurations.

A correctly installed element helps wipe oil, mud and other fluid from the moving line. Match the element outer profile and seating dimensions to the housing. Any pressure containment requirement must be checked against the complete assembly manufacturer documentation and operating instructions.

Factory Outlet:

Shanghai Qinuo Industry Co., Ltd supplies rubber sealing components under the SHQN brand. Our ISO 9001 quality management system supports production and inspection requirements. Custom oil saver enquiries should include the drawing, compound requirements and order quantity.

HNBR and nitrile are compound options for this replacement range. Select the supplied compound using the actual fluid composition, continuous and peak temperature, line condition and wear requirements. For gas or sour service, provide the gas composition, decompression conditions and required compound qualification.

Inspect the line-contact surface and housing seating surfaces during maintenance. Follow the original adjustment instructions and replace worn elements as required. Service life depends on the compound, line surface, movement and operating conditions.

H and GA Oil Saver Rubber: Keep Type and Line Size Together

On the enquiry, pair each required type with its line diameter, bore, outer profile and height. For the additional 5/16, 7/32, 9/16 and 5/8 inch line-size references, specify the applicable type and component drawing for each order item.

For a multi-size order, use a separate packing-list row for each type-and-size combination. Include the compound reference and quantity so that H and GA elements can be checked and labelled separately.

Features of oil saver rubbers

• Replacement element matched to the oil saver assembly
• Helps wipe fluid from the moving line when correctly installed.

Application:

Swabbing or Electric(slick) line Operations

For pressure service, specify the complete oil saver assembly rating and follow the manufacturer installation and inspection requirements. The listed 2-3/8 and 2-7/8 inch tubing OD and 3-1/2 inch line pipe OD are equipment references, distinct from wireline diameter and element dimensions.

Production Pictures:

Packing:

Cartons, Pallets if necessary